Reference layout
KLEIN
snsten-Klein-Klein-layout
Loading the viewer…
snsten-Klein-Klein-layout
The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).
84Placed parts
61Nets
2Copper layers
147.93 × 104.81 mmBoard size
yesRouted
KiCad 6File format
Bill of materials
84 distinct parts
30 resolve to something in the catalog — click through to the footprint.
| Ref | Value | Footprint | Qty |
|---|---|---|---|
| B1 | JST Battery | KLOR:JST_PH_reversible | |
| B2 | Battery Pads | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm | |
| BZ1 | Buzzer | KLOR:Buzzer_Mallory_AST1109MLTRQ_reversible | |
| D1 | DIODE | kbd:D3_TH_SMD | |
| D10 | DIODE | kbd:D3_TH_SMD | |
| D11 | DIODE | kbd:D3_TH_SMD | |
| D12 | DIODE | kbd:D3_TH_SMD | |
| D13 | DIODE | kbd:D3_TH_SMD | |
| D14 | DIODE | kbd:D3_TH_SMD | |
| D15 | DIODE | kbd:D3_TH_SMD | |
| D16 | DIODE | kbd:D3_TH_SMD | |
| D17 | DIODE | kbd:D3_TH_SMD | |
| D18 | DIODE | kbd:D3_TH_SMD | |
| D19 | DIODE | kbd:D3_TH_SMD | |
| D2 | DIODE | kbd:D3_TH_SMD | |
| D3 | DIODE | kbd:D3_TH_SMD | |
| D4 | DIODE | kbd:D3_TH_SMD | |
| D5 | DIODE | kbd:D3_TH_SMD | |
| D6 | DIODE | kbd:D3_TH_SMD | |
| D7 | DIODE | kbd:D3_TH_SMD | |
| D8 | DIODE | kbd:D3_TH_SMD | |
| D9 | DIODE | kbd:D3_TH_SMD | |
| G3 | LOGO | Logo:klein | |
| G33 | LOGO | Logo:klein_small | |
| G34 | LOGO | Logo:klein_small | |
| G4 | LOGO | Logo:klein | |
| H1 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | |
| H10 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | |
| H2 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | |
| H3 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | |
| H4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | |
| H5 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | |
| H6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | |
| H7 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | |
| H8 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO7380_Pad | |
| H9 | MountingHole | MountingHole:MountingHole_2.2mm_M2_ISO7380_Pad | |
| J1 | Conn_01x12 | Connector_FFC-FPC:Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal | |
| J2 | Haptic Buzz | KLOR:Pimoroni Haptic Buzz DRV2605L Driver | |
| J3 | Conn_01x04 | Connector_Wire:SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm | |
| J5 | OLED-128x64 | display:OLED-128x64 |
Show the other 44
| JP1 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP10 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | |
| JP11 | GND Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | |
| JP12 | VCC Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | |
| JP13 | GND Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | |
| JP14 | VCC Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | |
| JP15 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP16 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | |
| JP17 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | |
| JP2 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP3 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP4 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP5 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP6 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP7 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP8 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | |
| JP9 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | |
| R1 | 4.7K | Lily58-footprint:RESISTOR | |
| R2 | 4.7K | Lily58-footprint:RESISTOR | |
| RSW1 | SW_Push | KLOR:SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010_both_sides | |
| S1 | EG1218 | SSAJ110100:RevSlideSwitch | |
| SW1 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW10 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW11 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW12 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW13 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW14 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW15 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW16 | RotaryEncoder_Switch | reversible-kicad-footprints:MX-1U-EC11_Switch | |
| SW17 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW18 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW19 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW2 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW3 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW4 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW5 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW6 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW7 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW8 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| SW9 | MX_SW_HS | Lily58_Pro-footprint:MX_Choc_Hotswap_Mod | |
| T1 | Trackpad_Mount | reversible-kicad-footprints:Trackpad Mount | |
| U1 | XIAO-BLE | xiao:XIAO-BLE | |
| U2 | ProMicro | Lily58-footprint:ProMicro_rev2 | |
| U3 | TRRS | kbd:MJ-4PP-9 |
Provenance
- Repository
- snsten/Klein ↗
- Commit
- unknown
- Licence
- CC-BY-4.0
How it is used
Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.