SolderWire-0.25sqmm_1x04_P4.2mm_D0.65mm_OD1.7mm_Relief
Connector_Wire
Soldered wire connection with feed through strain relief, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
4 pads
- Mount
- Through hole
- Courtyard
- 15.8 × 13.22 mm
- Pads
- 4
- File
- 6 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Motorsport PUTM EV STEERING WHEEL 2022 | 111 | 101 | 2 | 111 × 63.2 mm | CC-BY-4.0 | PUT-Motorsport/PUTM_EV_STEERING_WHEEL_2022 ↗ |
| Multicdc | 37 | 24 | 2 | 116 × 30 mm | CC-BY-4.0 | ondras12345/multicdc ↗ |
| Corolla 9th Gen ADU Dash Connector | 11 | 58 | 2 | 92.5 × 70 mm | CC-BY-4.0 | dadbodcarmod/wiring-adapters ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception