Get Trace

Reference layout

Corolla 9th Gen ADU Dash Connector

dadbodcarmod-wiring-adapters-wiring-adapters-layout

Loading the viewer…

dadbodcarmod-wiring-adapters-wiring-adapters-layout

The project archive carries the board, its project file and the upstream licence. The archive is zstd-compressed (tar.zst).

11Placed parts
58Nets
2Copper layers
92.5 × 70 mmBoard size
yesRouted
KiCad 6File format

Bill of materials

11 distinct parts

9 resolve to something in the catalog — click through to the footprint.

RefValueFootprintQty
J1Corolla Dash Connectortoyota:2006 Corolla Dash Connector
J2CAN Bus to ECUConnector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm_Relief
J3USB Connector (Optional)Connector_Wire:SolderWire-0.25sqmm_1x04_P4.2mm_D0.65mm_OD1.7mm_Relief
J4Rotary Switch (Optional)Connector_Wire:SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm_Relief
J5Oil/Water Temp Sensor (Optional)Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm_Relief
J6CAN Bus Two (Optional)Connector_Wire:SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm_Relief
J7ADU_Connectorecumaster:Wires for ADU Connector
JP1SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels
JP2SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels
JP3SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm
JP4SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels

Provenance

Commit
unknown
Licence
CC-BY-4.0

How it is used

Trace's agent reads this design as context — what parts a board like this carries, how they are grouped across sheets, what a plausible layer stack and board size look like for the job. It is not copied. The licence above is permissive, and it, the repository and the commit are recorded so the origin of anything derived from it is always answerable.