SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm_Relief
Connector_Wire
Soldered wire connection with feed through strain relief, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter
Footprint
2 pads
- Mount
- Through hole
- Courtyard
- 8.6 × 17.5 mm
- Pads
- 2
- File
- 4 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Projects | 47 | 26 | 2 | 100 × 100 mm | CC-BY-4.0 | radioclub/projects ↗ |
| Corolla 9th Gen ADU Dash Connector | 11 | 58 | 2 | 92.5 × 70 mm | CC-BY-4.0 | dadbodcarmod/wiring-adapters ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception