MountingHole_2.2mm_M2_ISO14580_Pad_TopBottom
MountingHole
Mounting Hole 2.2mm, M2, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 4.3 × 4.3 mm
- Pads
- 1
- File
- 2 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| BikeRadar BOARD3 | 229 | 183 | 6 | 48.16 × 49.99 mm | CC-BY-4.0 | Penta0308/BikeRadar ↗ |
| Open MOtor DRiver Initiative - Single Axis (OMODRI_SA) | 216 | 320 | 8 | 54.82 × 57.65 mm | CC-BY-4.0 | open-dynamic-robot-initiative/open-motor-driver-initiative ↗ |
| Open MOtor DRiver Initiative - Single Axis (OMODRI_SA) | 209 | 324 | 8 | 54.82 × 57.65 mm | CC-BY-4.0 | open-dynamic-robot-initiative/open-motor-driver-initiative ↗ |
| Ctahr Board | 105 | 86 | 2 | 99 × 70 mm | CC-BY-4.0 | Talw3g/ctahr_board ↗ |
| Umich FlexGlO BOARD3 | 102 | 80 | 4 | 60 × 50.66 mm | CC-BY-4.0 | Mbutton-umich/FlexGlO ↗ |
| Anver OmniStimEvalBoard Hardware | 102 | 120 | 2 | 113.03 × 65 mm | CC-BY-4.0 | Hamza-Anver/OmniStimEvalBoard-Hardware ↗ |
| RykerConnect | 67 | 60 | 2 | 102 × 34 mm | CC-BY-4.0 | JanB97/RykerConnect ↗ |
| ADACHI BOARD | 64 | 70 | 2 | 30.1 × 59.9 mm | CC-BY-4.0 | AREIVAN/ADACHI-BOARD ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception