MountingHole_2.5mm_Pad_TopOnly
MountingHole
Mounting Hole 2.5mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 5.5 × 5.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Srvant Board | 276 | 390 | 6 | 100 × 220 mm | CC-BY-4.0 | lwolf/srvant-board ↗ |
| Robotics AI.R Autonomous Robot | 152 | 66 | 6 | 145 × 65 mm | CC-BY-4.0 | Lapland-Robotics/AI.R-Autonomous_Robot ↗ |
| nRF9151 Feather | 151 | 175 | 4 | 50.8 × 22.86 mm | CC-BY-4.0 | circuitdojo/nrf9151-feather ↗ |
| Zuko BOARD3 | 67 | 62 | 4 | 100 × 40 mm | CC-BY-4.0 | reubenstr/zuko ↗ |
| Eurorack Course BOARD3 | 67 | 44 | 2 | 61.9 × 108.7 mm | CC-BY-4.0 | elandahl/eurorack-course ↗ |
| Free Lance Projects BOARD12 | 39 | 55 | 2 | 63.86 × 77.88 mm | CC-BY-4.0 | ambadran/Free-Lance-Projects ↗ |
| Carte Alim | 12 | 5 | 2 | 36 × 24 mm | CC-BY-4.0 | evolutek/carte-alim ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception