MountingHole_2.7mm_M2.5_Pad_Via
MountingHole
Mounting Hole 2.7mm, M2.5, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 5.9 × 5.9 mm
- Pads
- 1
- File
- 3 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Benchy Motherboard - AM625 | 1,054 | 1,094 | 8 | 300 × 120 mm | CC-BY-4.0 | Daxxn/BenchyReloaded ↗ |
| Degree BOARD2 | 764 | 572 | 4 | 236.07 × 156.9 mm | CC-BY-4.0 | buglalis/degree ↗ |
| TINYZ80CLONE | 334 | 336 | 4 | 139 × 86.68 mm | CC-BY-4.0 | andrisr223/tinyz80clone ↗ |
| IMRC RPiCluster2 BOARD2 | 334 | 52 | 2 | 100 × 100 mm | CC-BY-4.0 | Terminus-IMRC/RPiCluster2 ↗ |
| Meowality | 262 | 523 | 6 | 200 × 75 mm | CC-BY-4.0 | gatecat/meowality ↗ |
| Tsar | 205 | 244 | 4 | 49.59 × 99.82 mm | CC-BY-4.0 | Shubhamai/tsar ↗ |
| EcoApi BeeHiveMonitoring | 179 | 109 | 4 | 90.6 × 58.05 mm | CC-BY-4.0 | EcoApi/EcoApi_BeeHiveMonitoring ↗ |
| Network Frog Hardware | 171 | 181 | 6 | 84 × 50 mm | CC-BY-4.0 | Ribbit-Network/ribbit-network-frog-hardware ↗ |
| Epfl GSR Monitor | 159 | 83 | 4 | 53.37 × 38.45 mm | CC-BY-4.0 | esl-epfl/GSR_monitor ↗ |
| OrthoKeyboard75 | 150 | 126 | 2 | 285 × 94 mm | CC-BY-4.0 | Wa1tee/OrthoKeyboard75 ↗ |
| Rocketry Team EPS V1 | 150 | 98 | 4 | 100 × 100 mm | CC-BY-4.0 | McMaster-Rocketry-Team/EPS_V1 ↗ |
| Dutlink Board | 144 | 114 | 4 | 170 × 170 mm | CC-BY-4.0 | the78mole/dutlink-board ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception