MountingHole_3.5mm_Pad_TopBottom
MountingHole
Mounting Hole 3.5mm, generated by kicad-footprint-generator mountinghole.py
Footprint
1 pads
- Mount
- Through hole
- Courtyard
- 7.5 × 7.5 mm
- Pads
- 1
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Luminator MAX3000 Driver Board | 344 | 379 | 4 | 189.44 × 59.1 mm | CC-BY-4.0 | NietoSkunk/FlippyDriver ↗ |
| Scout Scoms Tacnpr | 310 | 207 | 4 | 99.06 × 99.06 mm | CC-BY-4.0 | partio-scout/scoms-tacnpr ↗ |
| Luminator MAX3000 Driver Board | 308 | 363 | 4 | 177.56 × 59.1 mm | CC-BY-4.0 | jculpon/FlippyDriver ↗ |
| Homebrew 65c02 Computer | 275 | 345 | 4 | 127.64 × 97.97 mm | CC-BY-4.0 | snorklerjoe/useful6502 ↗ |
| KICAD PCBs BOARD20 | 189 | 180 | 4 | 153.66 × 108.47 mm | CC-BY-4.0 | raybello/KICAD-PCBs ↗ |
| Ud 29 BOARD2 | 129 | 72 | 2 | 85 × 85 mm | CC-BY-4.0 | MrSimranjitSingh/ud_29 ↗ |
| Ud 29 | 128 | 72 | 2 | 85 × 100 mm | CC-BY-4.0 | MrSimranjitSingh/ud_29 ↗ |
| P2 Breakout for Kevinbot v3 | 125 | 174 | 2 | 196.51 × 95.41 mm | CC-BY-4.0 | meowmeowahr/KevinbotV3-KiCAD ↗ |
| SolarDataLogger BOARD2 | 70 | 71 | 6 | 90 × 90 mm | CC-BY-4.0 | brokebit/SolarDataLogger ↗ |
| Ee Sw 2025 BOARD19 | 69 | 73 | 2 | 95.01 × 78 mm | CC-BY-4.0 | RedBirdRacing/ee_sw_2025 ↗ |
| SCR23 Analog To Can | 62 | 94 | 2 | 77.98 × 62.48 mm | CC-BY-4.0 | m888r/scr23-analog-to-can ↗ |
| HANDS EMG BOARD4 | 57 | 41 | 4 | 63.5 × 44.45 mm | CC-BY-4.0 | blakep7/HANDS-EMG ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception