Footprint
20 pads
- Mount
- Surface mount
- Courtyard
- 6.9 × 9.3 mm
- Pads
- 20
- File
- 7 KB
3D model
STEPPackage_SO_SSOP-20_3.9x8.7mm_P0.635mm
6.20 × 8.70 × 1.10 mm
267 KB STEP
- Library
- Package_SO_SSOP-20_3.9x8.7mm
- Model page
- Open →
Parts that use it
4 components in the catalog place this footprint
FT231XS
SYMFP3D
Interface_USB
Full Speed USB to Full Handshake UART, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 6.9×9.3
SN74CB3T3245DBQ
SYMFP3D
gekkio-Gekkio_Logic_LevelTranslator
8-bit FET bus switch, 2.5-V/3.3-V low-voltage with 5-V tolerant level shifter, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 6.9×9.3
LTC4314xGN
SYMFP3D
Interface_Expansion
Pin-Selectable, 4-Channel, 2-Wire Multiplexer with Bus Buffers, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 6.9×9.3
FT221XS
SYMFP3D
Interface_USB
Full Speed USB to 8-Bit SPI / FT1248 Bridge, SSOP-20
- Pins
- 20
- Pads
- 20
- SMD
- 6.9×9.3
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Garage Hardware BOARD2 | 621 | 437 | 4 | 96.72 × 175.62 mm | CC-BY-4.0 | Voltworks-Garage/Hardware ↗ |
| Technology MovingDisplay3 Circuit BOARD8 | 356 | 466 | 4 | 90 × 57 mm | CC-BY-4.0 | Tomoshibi-technology/MovingDisplay3-Circuit ↗ |
| TINYZ80CLONE | 334 | 336 | 4 | 139 × 86.68 mm | CC-BY-4.0 | andrisr223/tinyz80clone ↗ |
| GRBL Board | 287 | 310 | 4 | 138.43 × 138.3 mm | CC-BY-4.0 | TheRealOrange/GRBL_board ↗ |
| cm4_motherboard | 268 | 370 | 4 | 118 × 117 mm | CC-BY-4.0 | Twisted-Fields/acorn-robot-electronics ↗ |
| Esp Drone BOARD3 | 226 | 304 | 4 | 125.12 × 166.12 mm | CC-BY-4.0 | physiii/esp-drone ↗ |
| STM32 Nixie | 196 | 215 | 4 | 154 × 57 mm | CC-BY-4.0 | arjunven/STM32_Nixie ↗ |
| Technology MovingDisplay3 Circuit BOARD5 | 181 | 202 | 2 | 53.49 × 71.72 mm | CC-BY-4.0 | Tomoshibi-technology/MovingDisplay3-Circuit ↗ |
| E TKT | 158 | 106 | 6 | 99.57 × 76.2 mm | CC-BY-4.0 | hacklabkyiv/E-TKT ↗ |
| Infrared model train detector | 128 | 103 | 2 | 160 × 35 mm | CC-BY-4.0 | MarkusFischer/ir-train-detector ↗ |
| Ack-Rover Controller | 114 | 116 | 4 | 108.71 × 111.76 mm | CC-BY-4.0 | AESilky/ack-ack ↗ |
| TINYZ80CLONE BOARD2 | 114 | 192 | 2 | 72.39 × 66.66 mm | CC-BY-4.0 | andrisr223/tinyz80clone ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception