Symbol
2 pins- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
noneno footprint linked
This symbol carries no usable footprint reference, so nothing is linked. Generating one is a better answer than guessing.
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
No footprint is linked, so there is nothing to cross-check.
| Pin | Name | Type |
|---|---|---|
| 1 | — | passive |
| 2 | — | passive |
On real boards
20+ designs use this part
20 placed it by name in a schematic. Largest first.
- IBM PCjrby name
- Vortex Pok3r RGB 2by name
- Vortex 22-key Testerby name
- AcolyteHandPICd24by name
- IBM Power Adapter FRU 48G8942by name
- Line Following Robotby name
- USB Hub Project ProjektUSBHUBby name
- Party Line 80by name
- RP2040 AS3394by name
- ESR Systemby name
- LoRa-iBBRSby name
- Low Pass Filter LP2by name
- RF Tin Canby name
- Party Line 80by name
- bitaxeGamma Turboby name
- Noise Generator and Mixerby name
- Vespertilioby name
- Amplificateur Audio (Base Saine)by name
- Schematic, Main Logic Board, 128kby name
- Spectrum Analyzer IF and Log Ampby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- none
- Cross-check
- not confirmed
