ENS210
Sensor_Humidity
Relative Humidity and Temperature Sensor with I2C Interface
Symbol
5 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
5 pads
- Library
- Package_DFN_QFN
- Mount
- smd
- Courtyard
- 3 × 2.5 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | VDD | power_in | 1 |
| 2 | SCL | input | 2 |
| 3 | SDA | bidirectional | 3 |
| 4 | GND | power_in | 4 |
| 5 | GND | passive | 5 |
On real boards
17 designs use this part
5 placed it by name in a schematic; 12 carry its footprint on a board, and no other part in the catalog uses that footprint. Largest first.
- IOT Mess Hardware BOARD20by footprint
- ClimateSprinklerController BOARD4by footprint
- ClimateSprinklerController BOARD5by footprint
- ClimateSprinklerControllerby footprint
- ClimateSprinklerController BOARD3by footprint
- Kit Versaby footprint
- SARA Rx Application Boardby footprint
- ClimateSprinklerController BOARD2by footprint
- Monitorby footprint
- SmartSensorby footprint
- FiringPiby name
- ESP32 with Temperature sensor and RGB LED PCB Designby name
- Custom EPS32by name
- ESP32 With Temp Sensor PCB Designby footprint
- IOT Mess Hardwareby name
- KNX Universal Taster BOARD5by footprint
- KNX Universal Tasterby name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed