SHT31-DIS
Sensor_Humidity
I²C humidity and temperature sensor, ±2%RH, ±0.2°C, DFN-8
Symbol
9 pins
- Units
- 1
- Kind
- part
- Grid
- on 1.27 mm
Footprint
9 pads
- Library
- Sensor_Humidity
- Mount
- smd
- Courtyard
- 3.4 × 3 mm
- Link
- exact
- Footprint page
- Open →
3D model
noneno 3D model
The footprint references no model, or the referenced model is not in the upstream package set.
Pins and pads
Every pin on the symbol has a pad on the footprint.
| Pin | Name | Type | Pad |
|---|---|---|---|
| 1 | SDA | bidirectional | 1 |
| 2 | ADDR | input | 2 |
| 3 | ALERT | output | 3 |
| 4 | SCL | input | 4 |
| 5 | VDD | power_in | 5 |
| 6 | ~{RESET} | input | 6 |
| 7 | R | passive | 7 |
| 8 | VSS | power_in | 8 |
| 9 | VSS | passive | 9 |
On real boards
20+ designs use this part
12 placed it by name in a schematic; 8 carry its footprint on a board, and no other part in the catalog uses that footprint. Largest first.
- WS2812 Clockby footprint
- ESP MESS BOARD13by footprint
- IOT Mess Hardware BOARD20by footprint
- ESP MESS BOARD11by footprint
- ESP MESS BOARD15by footprint
- BATDATUNIT01Cby footprint
- SurvBotby footprint
- Reinvented Boardcomputerby footprint
- ESP MESSby name
- PIND02Aby name
- Particle BAMF23 Badgeby name
- LectureFeatherby name
- DL_mainby name
- Temperature and humidity sensor for ESPhomeby name
- USTSIPIN03Cby name
- Gas Weigtherby name
- IOT Mess Hardwareby name
- ESP MESSby name
- RoomSensorby name
- 0016 Temperature Humidity Module SHT31by name
Provenance
- Source
- kicad-symbols
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception
- Link method
- exact
- Cross-check
- passed