Footprints

47 footprints matching “0.50”

Land patterns on their own — 19,830 of them, most never referenced by a symbol in the catalog. Each passed the courtyard and pad checks; 7,626 come with the 3D model they name.

I need

Symbol Footprint 3D model

Footprints on their own, whether or not a symbol uses them.

47 footprints · page 1 of 2

Matched by name and keywords. Search by meaning instead

SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm

FP—

Connector_Wire

Soldered wire connection, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 2
THT: 8.2×3.2
Boards: 41

SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm

FP—

Connector_Wire

Soldered wire connection, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 1
THT: 3.6×3.2
Boards: 29

SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm

FP—

Connector_Wire

Soldered wire connection, for a single 0.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter

Pads: 1
THT: 3.8×3.3
Boards: 12

Fuseholder_Clip-5x20mm_Littelfuse_100_Inline_P20.50x4.60mm_D1.30mm_Horizontal

FP—

Fuse

Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 100, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf

Pads: 2
THT: 23.3×6.4
Boards: 11

SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm_Relief

FP—

Connector_Wire

Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 2
THT: 8.2×16.0
Boards: 7

SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm

FP—

Connector_Wire

Soldered wire connection, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter

Pads: 2
THT: 8.6×3.3
Boards: 7

SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm

FP—

Connector_Wire

Soldered wire connection, for 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 3
THT: 12.8×3.2
Boards: 6

SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm

FP—

Connector_Wire

Soldered wire connection, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 4
THT: 17.4×3.2
Boards: 6

Fuseholder_Clip-5x20mm_Littelfuse_445-030_Inline_P20.50x5.20mm_D1.30mm_Horizontal

FP—

Fuse

Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 445/030, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf

Pads: 2
THT: 23.3×5.7
Boards: 5

Fuseholder_Clip-5x20mm_Littelfuse_520_Inline_P20.50x5.80mm_D1.30mm_Horizontal

FP—

Fuse

Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 520, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf

Pads: 2
THT: 23.3×6.0
Boards: 5

SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm_Relief

FP—

Connector_Wire

Soldered wire connection with feed through strain relief, for a single 0.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter

Pads: 1
THT: 3.8×17.4
Boards: 3

SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_Relief

FP—

Connector_Wire

Soldered wire connection with feed through strain relief, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 1
THT: 3.6×16.0
Boards: 2

SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm

FP—

Connector_Wire

Soldered wire connection, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter

Pads: 4
THT: 18.2×3.3
Boards: 2

SolderWire-0.5sqmm_1x05_P4.8mm_D0.9mm_OD2.3mm

FP—

Connector_Wire

Soldered wire connection, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter

Pads: 5
THT: 23.0×3.3
Boards: 2

SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm

FP—

Connector_Wire

Soldered wire connection, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter

Pads: 6
THT: 27.8×3.3
Boards: 2

SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm_Relief

FP—

Connector_Wire

Soldered wire connection with feed through strain relief, for 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 3
THT: 12.8×16.0
Boards: 1

SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm

FP—

Connector_Wire

Soldered wire connection, for 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=11), bend radius 3 times outer diameter

Pads: 3
THT: 13.4×3.3
Boards: 1

SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm_Relief

FP—

Connector_Wire

Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 4
THT: 17.4×16.0
Boards: 1

SolderWire-0.5sqmm_1x05_P4.6mm_D0.9mm_OD2.1mm_Relief

FP—

Connector_Wire

Soldered wire connection with feed through strain relief, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 5
THT: 22.0×16.0
Boards: 1

SolderWire-0.5sqmm_1x06_P4.6mm_D0.9mm_OD2.1mm

FP—

Connector_Wire

Soldered wire connection, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.50 (https://www.staubli.com/content/dam/ecs/catalogs-brochures/TM/CAB-Main-11014119-en.pdf#page=9), bend radius 3 times outer diameter

Pads: 6
THT: 26.6×3.2
Boards: 1