MountingHole_5mm
MountingHole
Mounting Hole 5mm, no annular, generated by kicad-footprint-generator mountinghole.py
Footprint
0 pads
- Mount
- exclude_from_pos_files
- Courtyard
- 10.5 × 10.5 mm
- Pads
- 0
- File
- 1 KB
3D model
noneno 3D model
This footprint names no 3D model, or names one the upstream package set never shipped. Nothing is shown rather than a model that 404s.
On real boards
The largest boards that carry it
| Design | Parts | Nets | Layers | Board | Licence | Source |
|---|---|---|---|---|---|---|
| Deimos BOARD8 | 545 | 399 | 4 | 219.03 × 95 mm | CC-BY-4.0 | deimoscontrols/deimos ↗ |
| Deimos BOARD2 | 500 | 384 | 4 | 293.57 × 72 mm | CC-BY-4.0 | deimoscontrols/deimos ↗ |
| Deimos BOARD5 | 497 | 423 | 4 | 235.05 × 71.98 mm | CC-BY-4.0 | deimoscontrols/deimos ↗ |
| Zx Sizif 512 BOARD2 | 214 | 235 | 2 | 212.99 × 65.05 mm | CC-BY-4.0 | UzixLS/zx-sizif-512 ↗ |
| ZX-SIZIF-512 | 206 | 230 | 2 | 212.99 × 65.05 mm | CC-BY-4.0 | UzixLS/zx-sizif-512 ↗ |
| Karcsi (INDACT Robot Arm) - Main board | 201 | 285 | 4 | 249.94 × 149.35 mm | CC-BY-4.0 | legokor/INDACT_Hardware ↗ |
| ClimateSprinklerController BOARD5 | 194 | 142 | 2 | 136 × 100 mm | CC-BY-4.0 | kbx81/ClimateSprinklerController ↗ |
| ClimateSprinklerController | 187 | 142 | 2 | 136 × 100 mm | CC-BY-4.0 | kbx81/ClimateSprinklerController ↗ |
| ZX Sizif-512 | 186 | 235 | 2 | 213 × 65 mm | CC-BY-4.0 | UzixLS/zx-sizif-512 ↗ |
| Sizif-512 | 186 | 235 | 2 | 213 × 65 mm | CC-BY-4.0 | UzixLS/zx-sizif-512 ↗ |
| Karabas 128 Pcb | 160 | 194 | 2 | 212.98 × 129.99 mm | CC-BY-4.0 | andykarpov/karabas-128-pcb ↗ |
| Micromouse KICAD | 158 | 155 | 2 | 85 × 95 mm | CC-BY-4.0 | aiwachow/Micromouse-KICAD ↗ |
Provenance
- Source
- kicad-footprints
- Credit
- KiCad Libraries Contributors
- Licence
- CC-BY-SA-4.0-with-KiCad-exception